Model for 3D printing of coupling rollers used in mechanical interlocking of type Einheit for coupling of pairs of signal or lock levers. The model contains additional parts required for special mounting cases:
- rollers mounted on the base leg,
- rollers mounted directly to the left of the base leg (with an undercut support).
Parts are optimized for 3D printing in FFF technique (fused PLA or PETG filament). Recommended basic parameters of the printout:
- layer height: 0.2 mm,
- infill density: 20% (e.g. grid fill pattern),
- selected parts may require printing with additional supports.
The model may require additional drilling patterns available as a separate download.
Based on:
- Album rysunków konstrukcyjnych urządzeń zabezpieczenia ruchu pociągów, vol. 2, Wydawnictwo Komunikacyjne, Warsaw 1961. Scans of the blueprints available at plany.zonk.pl (last access: 11th January 2025);
- Górecki, H.: Podręcznik montera ręcznych i elektromechanicznych urządzeń zabezpieczenia ruchu kolejowego, vol. 1 i 2, WKŁ, Warsaw 1967, 1969;
- Mikulski, A.: Mechaniczne urządzenia zabezpieczenia ruchu kolejowego, WKŁ, Warsaw 1965;
- Mikulski, A.: Mechaniczne urządzenia zabezpieczenia ruchu kolejowego, 4th edition, WKŁ, Warsaw 1979;
- Erläuterungen zu den Einheitszeichnungen für Stellwerksteile (STELL ERL), Deutsche Reichsbahn, F. Ullmann GmbH, Zwickau 1941 (collection by A. Zieliński);
- Einheitszeichnungen für Stellwerksteile, VES, Reichsbahn – Zentralamt, Berlin 1935 – 1943 (collection by P. Mierosławski);
- photos and measurements of interlocking from the collection of Polish Association of Railway Enthusiasts.